|
|
Titan SCR-4 Tankless Water Heaters
 |
 |
| Click to enlarge image(s) |
The new Titan SCR-4 With more than two decades of great success and customer satisfaction with our Titan-ETH, Titan-ATC, Titan-SCR, and Titan-SCR2, we decided it was time to increase the Titan family of tankless water heaters. Many things have changed in the last 20 years; most notably, in the past most houses had a bathroom with a standard shower and a sink. Today many homeowners and builders are upgrading the bathrooms with new things like body sprayers and multiple showerheads. Also additions like whirlpool tubs have become standard in new constructions as opposed to an expensive remodeling a few years ago. That is the main reason for the need for a bigger capacity tankless water heater development, another reason for a bigger unit is the cold temperatures in northern states where a higher rise in temperature is needed to heat the water instantly. We spent a lot of time talking with our distributors, installers, and customers directly, getting their feedback of what they were looking for. After two years of development and testing, we are proud to say that have achieved a state of the art heater and the newest member of the Niagara Industries family the TITAN-SCR4. Available in three models, the new TITAN-SCR4 comes in 18 KW, 19 KW, and 21 KW; which is ideal for a wide range of applications including residential and some commercial applications. One TITAN-SCR4 unit can supply all the hot water needed and in some applications, energy savings can pay back the unit cost in one year. The TITAN-SCR4 tankless water heater comes with a 10 year warranty on all water carrying components and all other parts are guarantied for one year. Installation is quick and easy requiring no venting, and the TITAN-SCR4 compact size allows installation almost anywhere. The TITAN-SCR4 is without a doubt the tankless water heater of the future. IMPORTANT NOTICE Check specifications and installation requirements on unit used. Voltage, Amperage, Breaker, and wire size may vary depending on local electrical standards, consult an electrician for guidance. Plastic pipes are not recommended for proper installation. The electrical specifications are based on 240 volts. It should be noted that higher voltage will increase power, just as lower voltage will have the reverse effect. User must determine the suitability of the unit for their application. Do not over heat water. Water temperature from 105º F to 120º F is adequate for all practical purposes. DO NOT WASTE ENERGY.
MODEL N-210 Recommended Use:
* For homes with high demand for hot water
* To quickly fill large tubs: Roman tubs, garden tubs, jacuzzi, etc
* For homes in the Northern part of the country with colder weather
Temperature Rise Chart (° Fahrenheit)
Model 1 GPM 1.5 GPM 2.0 GPM 2.5 GPM 3.0 GPM 3.5 GPM 4.0 GPM 4.5 GPM 5.0 GPM
N-210 143° 95° 71° 57° 48° 40° 38° 32° 29°
Notes: GPM - Gallons per minute. Degrees (°) Fahrenheit. Values are approximate.
Remember, that any adjustments made on your unit will take seconds to reach point of use. DO NOT OVER HEAT WATER. Water temperature from 105F to 120F is adequate for all practical purposes.
Electrical Requirements:
Breakers & Wire Max kW @ 240V Volts Max AMP @ 240V
2 x 50 amp, each with
a #8 AWG wire
(2-1 type, 2 hots + ground) 21 kW 240V 88
Notes: Ratings above using standard 240 Volts. Higher voltage will increase power, just as lower voltage will have the reverse effect. Units available in 208, 277 Volts.Unless otherwise specified, you will receive a 240V unit, as it can be used with 240/220V and it is the most common voltage used for this type of appliance. When installing, check specifications on unit used. Voltage, amperage, breaker and wire size may vary depending on local electrical standards. Consult your local professional for guidance.
SPECIFICATIONS |
| |
|
| Compliance Standards | UL-#499; ANSI | |
|
| Tested | Applied Research Lab #29-580 | |
|
| Dimensions | 11-1/2"W x 10-1/2"H x 3"D | |
|
| Unit Weight | 12 lbs. | |
|
| Materials | Brass and Copper Interior/Steel Casing. No Plastics used. | |
|
| Flow Rate | 5 GPM | |
|
| Pipe Fitting | 1/2" Standard Pipe | |
|
| Pressure Requirements | 5 PSI-Min./150 PSI-Max. | |
|
| Voltage & Wire Gauge | 240 Volts; 6 gauge | |
|
| Elements | Dual Nichrome/Incoloy Elements | |
|
| Energy Efficiency | Up to 99.5% | |
|
| Activation | 0.4 GPM-on; 0.3 GPM-off | |
|
| Indicators | Red-On; Green-Stand by | |
|
| Warranty | 10 Years on Casing; 1 Year on Components | |
|
| Protection | Dual Microtemp Sensor - Manual Resetable Thermostat | |
|
|
|
